姓名：童晓峰

职称：讲师

院系：能源电力创新研究院

研究方向：

1. 固体氧化物燃料电池/电解池技术基础与应用研究

2. 薄膜陶瓷器件成型与制备工艺研究

联系方式：

电话：

邮箱：xiaofeng.tong@ncepu.edu.cn

地址：D1006

个人简介及主要研究成果：

童晓峰，1991年12月出生于浙江省。2016年毕业于中国科学院上海硅酸盐研究所，获材料学硕士学位；2020年毕业于丹麦科技大学能源转换与存储系，获工学博士学位，期间曾在荷兰特温特大学做访问交流。2020年09月至今，在华北电力大学从事教学科研工作。主要开展固体氧化物燃料电池/电解池及相关测试分析与表征技术的基础与应用基础研究。作为负责人承担国家自然科学基金项目1项、中央高校项目1项，作为主要研究人员参加国家自然科学基金重大项目课题、丹麦国家能源部和丹麦创新战略基金项目等。迄今在Small，J. Mater. Chem. A，Chem. Eng. J., ACS Appl. Mater. Interfaces，J. Power Sources等SCI期刊上发表学术论文10余篇。曾在第十三届欧洲燃料电池论坛获得Christian Friedrich Schönbein奖。

主要科研项目情况：

[1] 国家自然科学基金青年项目，固体氧化物电解池Ni/YSZ电极强极化条件下衰减机理及抑制机制研究，2022-01至2024-12，主持。

[2] 中央高校面上项目，质子导体固体氧化物电池电解制氢研究，2021-01至2022-12，主持。

[3] 国家自然科学基金重大项目课题，多能互补的协同转化与能势耦合机制，2021-01至2025-12，参与。

[4] 丹麦国家能源部，Efficient Power2Gas Combining SOEC and Biomass Gasification (EP2Gas)，2017-09至2020-09，参与。

[5] 丹麦国家能源部，Towards Solid Oxide Electrolysis Plants in 2020，2015-08至2017-07，参与。

代表性论著：

[1] Yang, Y.; Tong, X.; Hauch, A.; Sun, X.; Yang, Z.; Peng, S.; Chen, M. Study of solid oxide electrolysis cells operated in potentiostatic mode: Effect of operating temperature on durability. Chemical Engineering Journal, 2021, 417, 129260. (SCI)

[2] Tong, X.; Xu, Y.; Tripkovic, D.; Hendriksen, P. V.; Kiebach, W.; Chen, M. Promotion of oxygen reduction and evolution by applying a nanoengineered hybrid catalyst on cobalt free electrodes for solid oxide cells, J. Mater. Chem. A, 2020, doi.org/10.1039/D0TA02979C. (SCI)

[3] Tong, X.; Ovtar, S.; Brodersen, K.; Hendriksen, P. V.; Chen, M. Large-area solid oxide cells with La_0.6Sr_0.4CoO_3-δ infiltrated oxygen electrodes for electricity generation and hydrogen production, J. Power Sources, 2020, 451, 227742. (SCI)

[4] Tong, X.; Hendriksen, P. V.; Hauch, A.; Sun, X.; Chen, M. An Up-scalable, Infiltration-Based Approach for Improving the Durability of Ni/YSZ Electrodes for Solid Oxide Cells, J. Electrochem. Soc., 2020, 167, 024519. (SCI)

[5] Khoshkalam, M., Tripković, Ð., Tong, X., Faghihi-Sani, M. A., Chen, M., Hendriksen, P. V.. Improving oxygen incorporation rate on (La_0.6Sr_0.4)_0.98FeO_3-δ via Pr₂Ni_1-xCu_xO_4+δ surface decoration. J. Power Sources, 2020, 457, 228035. (SCI)

[6] Trini, M.; Hauch, A.; Angelis, S. D.; Tong, X.; Hendriksen, P. V.; Chen, M. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells, J. Power Sources, 2020, 450, 227599. (SCI)

[7] Khoshkalam, M.; Sani, M. A.; Tong, X.; Hendriksen, P. V.; Chen, M. Enhanced Activity of Pr₆O₁₁ and CuO Infiltrated Ce_0.9Gd_0.1O₂ Based Composite Oxygen Electrodes, J. Electrochem. Soc., 2020, 167, 024505. (SCI)

[8] Tong, X.; Ovtar, S.; Brodersen, K.; Hendriksen, P. V.; Chen, M. A 4 x 4 cm² Nanoengineered Solid Oxide Electrolysis Cell for Efficient and Durable Hydrogen Production. ACS Appl Mater Interfaces, 2019, 11 (29), 25996-26004. (SCI)

[9] Ovtar, S.; Tong, X.; Bentzen, J. J.; Thyden, K. T. S.; Simonsen, S. B.; Chen, M. Boosting the Performance and Durability of Ni/YSZ Cathode for Hydrogen Production at High Current Densities via Decoration with Nano-Sized Electrocatalysts. Nanoscale 2019, 11 (10), 4394-4406. (SCI)

[10] Tong, X.; Hendriksen, P. V.; Hauch, A.; Sun, X.; Chen, M. Development of Solid Oxide Electrolysis Cells for Hydrogen Production at High Current Densities. ECS Trans. 2019, 91(1), 2433-2442.

[11] Tong, X.; Luo, T.; Meng, X.; Wu, H.; Li, J.; Liu, X.; Ji, X.; Wang, J.; Chen, C.; Zhan, Z. Shape-Dependent Activity of Ceria for Hydrogen Electro-Oxidation in Reduced-Temperature Solid Oxide Fuel Cells. Small 2015, 11 (41), 5581-8. (SCI)